Sennheiser Mke-600 Shotgun Camcorder

Sennheiser MKE-600 Shotgun Camcorder Microphone
+ Sennheiser KA600 Adapter Cable
Brand New in its Original Retail Box
The camera box
Authorized Dealer - Mfr # 505453 / UPC 615104223493
Here is what you get:

Sennheiser MKE 600 Shotgun Microphone

Sennheiser MZS 600 Shockmount for MKE 600 Microphone

Sennheiser MZW 600 Foam Windshield for MKE 600

Carrying Case

Limited 2-Year Warranty

In Addition

Sennheiser KA 600 - XLR Female to 1/8" TRS Male Connection Cable - 15" (40cm)

Limited 2-Year Warranty

Product Highlights

Resists Structure-Borne Noise

Selectable 100 Hz Low-Cut Filter

AA Battery or Phantom Powered

For Indie Films, TV & Documentaries

Very good suppression of structure-borne noise, Minimizes wind and handling noise

Phantom or battery powering, Battery switch with "Low Batt" indicator

Exceptional directivity, Maximum rejection of side noise, Switchable low-cut filter

For Camcorders and Video DSLRs, Flexible use on any camera due to compact form

Upgrade the audio quality in your video productions by switching from the built-in mic on your camera to the Sennheiser MKE 600
battery- or phantom-powered shotgun microphone. Its focused directional characteristics and resistance to structure-borne noise offer sonic results well suited to a variety of production scenarios from independent films and web series to nature shows and documentaries.
The MKE 600's high sensitivity and low-noise circuitry unlock improved sound quality without extreme gain on noisy camera preamps. With a natural roll-off at 40 Hz and a selectable low-cut filter at 100 Hz, the MKE 600 can deliver clear intelligibility while attenuating low-frequency noise such as rumble. Plus, its frequency response incorporates a gentle rise in the treble to enhance speech clarity. The lightweight and durable metal housing ensure reliable toughness without weighing down your rig. The included shoe shock mount accommodates mounting the MKE 600 to a camera or tripod.
The 10" long MKE 600 uses an interference tube and a supercardioid/lobar polar pattern to provide pronounced directivity on-axis along with significant attenuation of sound entering at the sides and rear, making the MKE 600 far more effective at capturing distant sources than the omnidirectional mics found in most cameras.
The MKE 600 naturally reduces sub-bass frequencies below 40 Hz to prevent unnatural bass buildup. Activate the switchable low-cut filter at 100 Hz to roll off more low-frequency noise from common sources such as air conditioners and traffic.
Thanks to its 3-pin XLR output and compliance with 48 VDC phantom powering, the MKE 600 is compatible with a variety of handheld audio recorders, field recorders, and mixer adapters, as well as built-in preamps on many camcorders and cinema cameras.
When using devices that don't offer phantom power, the MKE 600 may be powered for up to 150 hours by a single AA battery (available separately). Approximately 8 hours of operating time remain once the low-battery indicator lights up red. Use the on/off switch to prevent unnecessary battery drain.
The MKE 600 includes a shoe shockmount for easy placement on your camera or a tripod. To mount the MKE 600 on a boompole or mic stand, use the Rycote InVision INV-HG mkIII shockmount (available separately), which will also impede the transfer of vibrations between your boompole/stand and the mic.
The MKE 600 has a foam windscreen to reduce unwanted wind noise from breezes, fans, heaters, and air conditioners by up to 25 dB. Enhanced attenuation of wind noise is possible with the addition of an optional windshield such as the Rycote 15cm Super-Softie, which also provides high immunity to rain.
For maximum reduction of handling noise and wind noise in indoor or outdoor environments, consider a complete windjammer, windshield, and shockmount suspension system such as the Rycote Super-Blimp NTG or the large Rycote Super-Shield Kit (both available separately).
Sennheiser MKE 600 Specs Microphone Form Factor Stand/Boom Mount Sound Field Mono Operating Principle Line Gradient Capsule Condenser Polar Pattern Lobar, Supercardioid Orientation End Address Circuitry Solid-State Pad None High-Pass Filter 100 Hz Tone Adjustment None Indicators Single LED (Power) On-Board Controls High-Pass Filter, On/Off Windscreen Foam (Included) Performance Frequency Range 40 Hz to 20 kHz Maximum SPL 132 dB SPL (Phantom Power) 126 dB SPL (Battery Power) Off-Axis Rejection 5 dB at 60° >15 dB at 120° >10 dB at 180° Sensitivity 21 mV/Pa (Phantom Power) 19 mV/Pa (Battery Power) Equivalent Noise Level 15 dB A-Weighted (Phantom Power) 16 dB A-Weighted (Battery Power) Connectivity Output Connectors (Analog) 1 x XLR 3-Pin Power Operating Voltage 48 V ± 4 V Operating Current Consumption 4.4 mA (Phantom Power) Battery Type 1 x AA Approximate Battery Life 150 Hours Physical Color Black Mounting Camera-Mount (with Included Hardware) Construction Material Metal Operating Temperature 14 to 140°F / -10 to 60°C Dimensions ø: 0.79 x L: 10.08" / ø: 20 x L: 256 mm Weight 4.52 oz / 128 g (Microphone)" Packaging Info Package Weight 1.005 lb Box Dimensions (LxWxH) 13.6 x 5.6 x 3.45" For International Shipping Cost: Please click on the 'Shipping and Payments' tab on the top of the page. Sales Policy and Information
We offer Paypal, which is a fast and secure way of paying.
When paying with PayPal you may ship to whichever address you prefer.
We offer both Paypal and credit card payments. Shipping Information
Most orders are shipped within 24 hours.
Standard shipping within the USA is shipped via UPS Ground, which is a secure and fast way of shipping.
We know you're anxious to get your purchase. Therefore, we offer UPS 3 Day Select and UPS Next Day Air Saver for a special low rate.
Orders shipped to PO Box addresses are shipped via USPS.
Orders shipped internationally will ship via USPS. Attention Canadian and International Buyers:
Orders shipped internationally are shipped via USPS. UPS is available upon request.
We accept PayPal Payments from most international countries (wherever PayPal is accepted.)
On orders shipped outside the USA, there may be local customs charges. Buyers will be responsible for any and all customs fees and charges. Please check with your local authorities prior to purchase.
As per USA Regulations, we have to declare the full item amount when shipping overseas.

Returns Accepted for this item if it's within 30 Days